Maintenance

Maintenance on the Fixation unit should be done Weekly.

Fixation Unit Maintenance Procedure

1. The Fixation Unit should be completely cold
2. Open the two latches at the front of the Fixation Unit
   
   
   
   
3. Using 2 people open the fixation unit, THE DOOR IS VERY HEAVY
   

   

   
   
4. Using the chain links on the left and the right hook the door to the top of the Fixation Unit
   
   
5. Spray WD40 Copper Grease or WD40 Silicon Grease on the drive shafts
   

   or

    

    

   1. Located on the left and right hand side of the machine
      
      
      
   2. Spray from the top to the bottom to allow for even coating
      
      
      
      
6. Lower the door back in place THE DOOR IS VERY HEAVY, THIS IS A TWO PERSON OPERATION