Search Results

Sewn using monofilament (Clear thread) Fold 13cm elastic banding in half.                      Stitch across the top. Lay flag out print side down.                               Flag and banding can now be put together. Place flag material inside the ...

Follow the guide above using the colours:  Left Needle  Right Needle Note; If you are using a single needle, use the right needle and remove the left.

Sewn using monofilament (Clear thread) Fold 13cm elastic banding in half.                      Stitch across the top. Lay flag out print side down.                               Flag and banding can now be put together. Place flag material inside the ...

Follow the guide above using the colours:  Left Needle  Right Needle Note; If you are using a single needle, use the right needle and remove the left.

Sewn using monofilament (Clear thread) Fold 13cm elastic banding in half.                      Stitch across the top. Lay flag out print side down.                               Flag and banding can now be put together. Place flag material inside the ...

Sewn using monofilament (Clear thread) Fold 13cm elastic banding in half.                      Stitch across the top. Lay flag out print side down.                               Flag and banding can now be put together. Place flag material inside the ...

Our standard finish is unhemmed leaving just the raw edges - Intended for short use only When the flag pole is inserted and fitted to the base... it should look like the image below. You will requireBlack 60s thread for the machine headMonofilament thread ...

The finished barrier jacket should look like this. Spread the material out - with the wrong side facing up.  Fold the flaps over on each side andstitch them from top to bottom, Each side should look like this and you are now ready to sew the two...

The instruction manual can be found here - Z:\Training\Sewing Machine Or you can access it online - https://www.manuals.co.uk/juki/lh-4500c/manual?p=9

Double-sided flag used with tall flag poles When the flag is finished it should look like the image below YOU WILL REQUIRE Black 60s thread for the machine head Monofilament thread for the bobbin The printed flag White reinforcement tape 2 Hooks with ...