Onyx Thrive Rip

• Opening a File & Ripping a File
• Sending a File to the Printer
• Nesting Files
• Selecting a Cutter
• Editing a File Using Preflight
• Using White Ink
• Setting Up a Preset
• Changing a Printers IP Address
• Profiling a Printer Substrate
• Deleting Files
• Sharing Zund Cut Center / Summa Cut Folder
• Zund Cut Server - Unable to Communicate with Zund Cut Server

Opening a File & Ripping a File

Sending a File to the Printer

Nesting Files

Selecting a Cutter

Editing a File Using Preflight

Using White Ink

Setting Up a Preset

Changing a Printers IP Address

Profiling a Printer Substrate

Deleting Files

Sharing Zund Cut Center / Summa Cut Folder

1. Navigate to the folder below on the Onyx Server you want to share the folder of
   

   C:\ONYXThrive21\cutter

2. Right click the folder you want to share
   

   
   

3. Select Properties
4. Go to the sharing tab
   

   

   
   
5. Click on Advanced Sharing
   

   
   

   
   

6. Check the box for share this folder then add a new share with the Computer Name followed by a dash and a folder description e.g. Print002-ZundCutCenter (How to get the computer name)

   
   
   

7. Click permissions
   

   
   
   

8. Select Everyone and make sure all permissions are selected
   

   

9. Click "Add"
   

   
   

   
   
10. Enter "maticmedia" and click okay
    

    
    

    
    
11. Add the permissions for maticmedia
    

    

    
    
12. This is the share path you need to add to the hot folder on the Zund Cut Server
    
    

    

13. Go to the Zund Cut Server Computer
    
14. Right click the Zund Cut Manager Icon at the bottom right of the screen
    

    
    
    

15. Select Cut Manager
    

    

    
    

16. In Cut Manager select Settings Tab and then Hotfolders
    
    
    

17. Click the plus symbol
    

    

18. Navigate to the share folder from step 9, in this case \\Print002\Print002-ZundCutCenter"
    

    

19. You may be prompted with the following, the username is maticmedia and no password.  Make sure to selected "Remember my credentials"
    
    
    If you see this error
    

20. If you see this error

    
    Go to how to fix user login error, no password
    

21. Click OK
    

    
    

    
    
22. Restart Computer

How to fix Permissions Denied Error

When receiving the error below you have to go to the computer you are trying to access and allow security permissions for all users in the network.  In the case below this would be PRINT002.

How to fix user login error, no password

When receiving the error below you have to go to the computer you are trying to access and allow network access with no passwords.  In the case below this would be PRINT002.

1. Click the network icon at the bottom right of the screen
   

   
   

   
   
2. Click Network and internet settings
   

   
   

   
   
3. Click properties
   

   

   
   
4. Change network to private
   

   

   
   
5. Go back to Network and Internet Settings and Click Network and Sharing Center
   
   
6. Click "Change advanced sharing settings"
   

   

   
   
7. Click on Private (Current Profile) and make sure file and printer sharing is selected
   

   

   
   
8. Click on Private Networks and Check Turn Off Password-protected sharing
   

   

Zund Cut Server - Unable to Communicate with Zund Cut Server

If you see the below error.  Turn off Zund Cut Server Direct in Cutter Settings