# Colorado 1650

# Introduction

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/476209474

# INSTALL FIRMWARE UPGRADES WITH ON REMOTE SERVICE

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/446784469

# How To Print Double Sided

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/435022771

# How To Print On Flexible (Fabric) Material

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/434694376

# Maintaining Print Quality

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334842238

# Automatic Nozel Optimisation

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334842308

# Cleaning Nozzels

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334842377

# Cleaning The Maintenance Station

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334842520

# Cleaning the Matrix Platen

[https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334842520](https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334842663)

# Clean the Platen

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334843674

# Vacuum The Chiller

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334843770

# Clean the Ink Unit

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334844020

# Replace the Wiper

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334845028

# Replace the Cutter / Cutting Knife

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334846174

# Replace the Filters

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334846818

# Replace Drive Gear On Media Shaft

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334847772

# Clean the Mirrors

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/334847772

# Clean the M&C Scanner

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/361029135

# Replace the Rollers of the Xtran Pinch

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/369523988

# Replace the Lubricators

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/369564400

# Replace the Winder Foams and Roller Assembly

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/371332942

# Clean the Printhead Area

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/371393086

# Clean the Buffer Plate

https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/432081174

# Colorado Issues and Error Codes

### Error Code printer/05\_YMS

<mark>Encoder</mark> strip needs wiped over, it’s a carriage position error, cleaning it should work as the <mark>encoder</mark> was changed not that long ago. If that doesn’t work it’ll need a service call logged and new strip fitted.

[How to clean the encoder strip.](https://manual.maticmedia.co.uk/books/colorado-1650/page/how-to-clean-colorado-encoder-strip "How to clean Colorado Encoder Strip")

# How to clean Colorado Encoder Strip

To clean the encoder strip on a Canon Colorado 1650 printer, you'll need a clean, lint-free cloth (or cotton swabs), and a small amount of isopropyl alcohol or window cleaner. Carefully inspect the strip for dirt or grease, and gently wipe it clean with the moistened cloth or swab. Be sure to avoid scratching or damaging the strip during the cleaning process.

### Detailed Steps:

1. Open the top cover
2. Locate the Encoder Strip: The encoder strip is a clear plastic strip that sits in front of the drive belt. It has a metal strip on the bottom half
3. Inspect for Dirt: Use a flashlight to inspect the strip for any dirt, grease, or smudges.
4. Moisten the Cleaning Material: Lightly moisten a lint-free cloth or cotton swab with isopropyl alcohol or window cleaner.
5. Clean the Strip: Gently wipe the encoder strip, ensuring the cleaning material is not dripping wet.
6. Dry if Needed: If any liquid remains on the strip, use a dry cloth or swab to dry it.
7. Reassemble: Close the printer cover and reconnect the power cord.