Adding Drill Holes

Using the Automatic Drill Hole Positioning System in Artwork System

Using matic track, when viewing an order, select 'edit' to change the individual settings of that artwork. Use 'All Settings' to change all artworks of the same size and product.

image-1662368409506.png

Changing the 'Drillhole X' changes the measurement in millimetres along the X axis [landscape]

Changing the 'Drillhole Y' changes the measurement in millimetres along the Y axis [vertical]

Drillhole Position is saved as presets, so each number has different layouts: 

Drillhole Size is the radius of the hole in millimetres. If you need a 5mm hole, enter '2.5'.

Select the 'Save' button when you scroll down in the same box, now check the image-1662372816942.png print-ready file to see the drill holes on the artwork.

image-1662373034725.png

Setting Up Drill Holes in Artwork via Corel Draw / Illustrator

Setting Up Bespoke Drill Holes Position in Customer Portal (AKA Graphic Warehouse)

The Customer Portal accepts DrillHoles as a layer called "DrillHoles"

Drillholes can be made as a 'CutContour' line, see instructions linked: Adding Cut Lines / Dig... | Matic Manual (maticmedia.co.uk)

Setting Up Drill Holes for Zund Cut Center

The Zund Cut Center accepts DrillHoles as a layer called "DrillHoles"


Setting Up Drill Holes for Onyx Thrive

When setting up for Onyx Thrive you should set up drill holes as a spot colour called CutContour



Revision #8
Created 5 May 2022 22:34:31 by Admin
Updated 5 September 2022 10:22:39 by Matt Parris