# Operating Panel - General Usage

### Viewing Jobs

When selecting a job in Active Jobs List (6) or Inactive jobs (8) it will display the artwork in the job Placement Preview (7)

[![image-1664875592621.png](https://manual.maticmedia.co.uk/uploads/images/gallery/2022-10/scaled-1680-/image-1664875592621.png)](https://manual.maticmedia.co.uk/uploads/images/gallery/2022-10/image-1664875592621.png)

### Viewing Print Layers

### Position Jobs

To position a job- use the offsets panel on the right-hand side under the preview.

[![image-1664899399398.png](https://manual.maticmedia.co.uk/uploads/images/gallery/2022-10/scaled-1680-/image-1664899399398.png)](https://manual.maticmedia.co.uk/uploads/images/gallery/2022-10/image-1664899399398.png)

Starting from the bottom left of the artwork you can select the horizontal and vertical offset. This is based on setting a board on the bed at 0x0mm based on the ruler position printed on the bed.

<p class="callout info">Tip: Print your job closest to the print head in case of print issues you can save the rest of the board</p>

### Creating Batch Jobs

#### Sequential

#### Collated

### Printing a Nozzle Check

Select Nozzle Check at the top right of the page (5)

[![image-1664902066794.png](https://manual.maticmedia.co.uk/uploads/images/gallery/2022-10/scaled-1680-/image-1664902066794.png)](https://manual.maticmedia.co.uk/uploads/images/gallery/2022-10/image-1664902066794.png)

This loads the pattern to print a nozzle check. Select if you'd like to print on the roll or on the bed (9) and then hit print.

### Pausing Jobs

Select Hold to pause a job. (4)

[![image-1664902288563.png](https://manual.maticmedia.co.uk/uploads/images/gallery/2022-10/scaled-1680-/image-1664902288563.png)](https://manual.maticmedia.co.uk/uploads/images/gallery/2022-10/image-1664902288563.png)

### Cancelling Jobs

Select Cancel (4)

### Deleting Jobs

Select Delete (4)